The prong snap button is the same as the snap button. A set of buttons consists of 4 parts, two of which are the same, that is, two small iron rings with claws. Because the prong snap button has short claws, it is not suitable for thick positions, but it is lighter than snap buttons. Generally, prong snap buttons can be used as fasteners for summer or children’s clothes or thin bags.

Part of the prong snap button is difficult to distinguish between the front and the back. If you don’t look closely, you can’t see it at all. If you look carefully, the inner edge of the front side is relatively flat, while the back side has a groove. Can be fixed. This must be paid attention to before installation.
Installation of prong snap button:
The installation tools of the prong snap button can be streamlined a lot. First, it does not need punching punches. The sharp claws can be passed directly from the front to the back. The tools it uses can be used in common with snap buttons, and only the punching tool with concave holes is required. Can. After putting the other half on the claw, use the same tool to hit the two parts to fix it.